BDFKR - OIL SLICK REMOVER
- MSDS: BDFKR
- Manufacturer: ICI AMERICAN INC (CHEM COMMODITIES DIST)
- Product Name: OIL SLICK REMOVER
- National Stock Number: 6850-00-172-9110
Product Identification
Product ID:OIL SLICK REMOVER
MSDS Date:01/01/1985
FSC:6850
NIIN:00-172-9110
MSDS Number: BDFKR
Responsible Party
WILMINGTON, DE 19897
US
Emergency Phone: NONE
Cage: KO421
Contractor
Cage: 70657
Ingredients
2-ETHYL BUTANOL
CAS: 97-95-0
RTECS: EL3850000
ACGIH TLV: (S) 50 PPM
SORBITAN MONO-OLEATE
CAS: 9005-65-6
RTECS: WG2932500
Hazards
Effects of Overexposure:EYES: IRRITATES & BURNS;INGEST: HARMFUL ;
INHAL: IRRITATES; SKIN: DERMATITIS
First Aid
First Aid:EYES/SKIN: FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST
15 MIN. -GET MEDICAL ATTN; INHAL: REMOVE INDIVIDUAL TO FRESH AIR;
GIVE ARTIFICIAL RESPIRATION AS REQUIRED. CALL A PHYSICIAN.
Fire Fighting
Flash Point:=53.3C, 128.F
Extinguishing Media:WATER, CO*2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APPARATUS.
Unusual Fire/Explosion Hazard:MAY BE IGNITED BY
HEAT,SPARK,FLAME.CONTAINER MAY EXPLODE IN HEAT OR FIRE
Accidental Release
Spill Release Procedures:WIPE UP WITH VERMICULITE OR SANE.SHOVEL
ABSORBED MATERIAL INTO SEALABLE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING. KEEP
AWAY FROM HEAT,SPARKS & FIRE. KEEP CONTAINER CLOSED. DONOT TRANSFER
TO UNMARKED CONTAINER. DONOT GET IN EYES.
Other Precautions:AVOID BREATHING VAPOR
Exposure Controls
Respiratory Protection:AS REQUIRED TO MINIMIZE EXPOSURE
Ventilation:LOCAL EXHAUST & MECHANICAL TO MAINTAIN CONC. BELOW TLV
Protective Gloves:RESISTANCE TYPE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED BY LOCAL PROCEDURES
Supplemental Safety and Health
Chemical Properties
HCC:F4
Appearance and Odor:AMBER LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
CORROSIVES, OXIDIZING AGENTS
Stability Condition to Avoid:HEAT & SOURCES OF IGNITION
Hazardous Decomposition Products:CO*2, CO, & WATER VAPOR
Disposal
Waste Disposal Methods:INCINERATE IN APPROVED EQUIPMENT IAW ESTABLISHED
FEDERAL,STATE & LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.